HS Codes | Chapter 76
Available in English only
7601: Unwrought aluminum:<nl/>
7601.10 - Aluminum, not alloyed:
7601.10.30.00 - Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than <il>9.5 mm</il>, in coils
7601.10.60.00 - Other
7601.20 - Aluminum alloys:
7601.20.30.00 - Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
- Other:
7601.20.60.00 - Containing 25 percent or more by weight of silicon
7601.20.90 - Other
7601.20.90.30 - Aluminum vanadium master alloy
- Other:
7601.20.90.45 - Of uniform circular cross section throughout its length, not in coils
7601.20.90.60 - Other, containing 0.03 percent or more by weight of lead (secondary aluminum)
- Other:
7601.20.90.75 - Remelt scrap ingot (6)
7601.20.90.90 - Other (6)
7602.00.00: Aluminum waste and scrap
7602.00.00.30 - Used beverage container scrap
7602.00.00.90 - Other
7603: Aluminum powders and flakes:
7603.10.00.00 - Powders of non-lamellar structure
7603.20.00.00 - Powders of lamellar structure; flakes
7604: Aluminum bars, rods and profiles:
7604.10 - Of aluminum, not alloyed:
7604.10.10.00 - Profiles
- Bars and rods:
7604.10.30 - Having a round cross section
7604.10.30.10 - With an outside diameter of less than 10 mm
7604.10.30.50 - With an outside diameter of 10 mm or more
7604.10.50 - Other
7604.10.50.30 - With a maximum cross-sectional dimension of less than 10 mm
7604.10.50.60 - With a maximum cross-sectional dimension of 10 mm or more
- Of aluminum alloys:
7604.21.00.00 - Hollow profiles
7604.29 - Other:
7604.29.10.00 - Other profiles
- Bars and rods:
7604.29.30 - Having a round cross section
7604.29.30.10 - With an outside diameter of less than <il>10 mm</il>
7604.29.30.50 - With an outside diameter of 10 mm or more
7604.29.50 - Other
7604.29.50.30 - With a maximum cross-sectional dimension of less than <il>10 mm</il>
7604.29.50.60 - With a maximum cross-sectional dimension of 10 mm or more
7605: Aluminum wire:
- Of aluminum, not alloyed:
7605.11.00 - Of which the maximum cross-sectional dimension exceeds <il>7 mm</il>
7605.11.00.30 - Of which the maximum cross-sectional dimension exceeds <il>9.5 mm</il>
7605.11.00.90 - Other
7605.19.00.00 - Other
- Of aluminum alloys:
7605.21.00 - Of which the maximum cross-sectional dimension exceeds <il>7 mm</il>
7605.21.00.30 - Of which the maximum cross-sectional dimension exceeds 9.5 mm
7605.21.00.90 - Other
7605.29.00.00 - Other
7606: Aluminum plates, sheets and strip, of a thickness exceeding <il>0.2 mm</il>:
- Rectangular (including square):
7606.11 - Of aluminum, not alloyed:
7606.11.30 - Not clad
7606.11.30.30 - With a thickness of more than 6.3 mm
7606.11.30.60 - With a thickness of 6.3 mm or less
7606.11.60.00 - Clad
7606.12 - Of aluminum alloys:
7606.12.30 - Not clad
7606.12.30.30 - With a thickness of more than <il>6.3 mm</il>
- With a thickness of <il>6.3 mm</il> or less:
- Aluminum can stock:
7606.12.30.45 - Body stock (6)
7606.12.30.55 - Lid stock (6)
7606.12.30.90 - Other
7606.12.60.00 - Clad
- Other:
7606.91 - Of aluminum, not alloyed:
7606.91.30 - Not clad
- With a thickness of more than <il>6.3 mm:</il>
7606.91.30.30 - Circles and discs
7606.91.30.60 - Other
- With a thickness of <il>6.3 mm</il> or less:
7606.91.30.75 - Circles and discs
7606.91.30.90 - Other
7606.91.60 - Clad
- With a thickness of more than <il>6.3 mm:</il>
7606.91.60.20 - Circles and discs
7606.91.60.40 - Other
- With a thickness of <il>6.3 mm</il> or less:
7606.91.60.60 - Circles and discs
7606.91.60.80 - Other
7606.92 - Of aluminum alloys:
7606.92.30 - Not clad
- With a thickness of more than <il>6.3 mm:</il>
7606.92.30.30 - Circles and discs
7606.92.30.60 - Other
- With a thickness of <il>6.3 mm</il> or less:
7606.92.30.75 - Circles and discs
7606.92.30.90 - Other
7606.92.60 - Clad
- With a thickness of more than 6.3 mm:
7606.92.60.20 - Circles and discs
7606.92.60.40 - Other
- With a thickness of 6.3 mm or less:
7606.92.60.60 - Circles and discs
7606.92.60.80 - Other
7607: Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm:
- Not backed:
7607.11 - Rolled but not further worked:
- Of a thickness not exceeding <il>0.15 mm:</il>
7607.11.30.00 - Of a thickness not exceeding <il>0.01 mm</il>
7607.11.60 - Of a thickness exceeding <il>0.01 mm</il>
7607.11.60.10 - Boxed aluminium foil weighing not more than 11.3 kg
7607.11.60.90 - Other
7607.11.90 - Other
- Aluminum can stock:
7607.11.90.30 - Body stock
7607.11.90.60 - Lid stock
7607.11.90.90 - Other
7607.19 - Other:
7607.19.10.00 - Etched capacitor foil
- Other:
7607.19.30.00 - Cut to shape, of a thickness not exceeding <il>0.15 mm</il>
7607.19.60.00 - Other
7607.20 - Backed:
7607.20.10.00 - Covered or decorated with a character, design, fancy effect or pattern
7607.20.50.00 - Other
7608: Aluminum tubes and pipes:
7608.10.00 - Of aluminum, not alloyed
7608.10.00.30 - Seamless
7608.10.00.90 - Other
7608.20.00 - Of aluminum alloys
7608.20.00.30 - Seamless
7608.20.00.90 - Other
7609.00.00.00: Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves)
7610: Aluminum structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminum plates, rods, profiles, tubes and the like, prepared for use in structures:
7610.10.00 - Doors, windows and their frames and thresholds for doors
7610.10.00.10 - Windows and their frames
7610.10.00.20 - Thresholds for doors
7610.10.00.30 - Other
7610.90.00 - Other
7610.90.00.20 - Sheet-metal roofing, siding, flooring, and roof guttering and drainage equipment
7610.90.00.40 - Architectural and ornamental work
- Other:
7610.90.00.60 - Mobile homes
7610.90.00.80 - Other
7611.00.00: Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
7611.00.00.30 - Tanks
7611.00.00.90 - Other
7612: Aluminum casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment:
7612.10.00.00 - Collapsible tubular containers
7612.90 - Other:
7612.90.10 - Of a capacity not exceeding 20 liters
7612.90.10.30 - Cans of a capacity not exceeding 355 ml
7612.90.10.60 - Cans of a capacity exceeding 355 ml but less than 3.8 liters
7612.90.10.90 - Other
7612.90.50.00 - Other
7613.00.00.00: Aluminum containers for compressed or liquefied gas
7614: Stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminum, not electrically insulated:
7614.10 - With steel core:
7614.10.10.00 - Not fitted with fittings and not made up into articles
7614.10.50.00 - Fitted with fittings or made up into articles
7614.90 - Other:
- Not fitted with fittings and not made up into articles:
7614.90.20.00 - Electrical conductors
7614.90.40.00 - Other
7614.90.50.00 - Fitted with fittings or made up into articles
7615: Table, kitchen or other household articles and parts thereof, of aluminum; pot scourers and scouring or polishing pads, gloves and the like, of aluminum; sanitary ware and parts thereof, of aluminum:
7615.10 - Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like:
7615.10.11.00 - Pot scourers and scouring or polishing pads, gloves and the like
- Other:
- Cooking and kitchen ware:
- Enameled or glazed or containing nonstick interior finishes:
7615.10.20 - Cast
7615.10.20.15 - Bakeware (cookware not suitable for stove top use) (6)
7615.10.20.25 - Other (6)
7615.10.30 - Other
7615.10.30.15 - Bakeware (cookware not suitable for stove top use) (6)
7615.10.30.25 - Other (6)
- Not enameled or glazed and not containing nonstick interior finishes:
7615.10.50 - Cast
7615.10.50.20 - Bakeware (cookware not suitable for stove top use) (6)
7615.10.50.40 - Other (6)
7615.10.71 - Other
7615.10.71.25 - Containers suitable for food preparation, baking, reheating or storage, 0.04 mm or more but not over 0.22 mm in thickness (6)
- Other cookware: (6)
7615.10.71.30 - Bakeware (cookware not suitable for stovetop use) (7)
7615.10.71.55 - Other (7)
7615.10.71.80 - Other (6)
7615.10.91.00 - Other
7615.20.00.00 - Sanitary ware and parts thereof
7616: Other articles of aluminum:
7616.10 - Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles:
7616.10.10.00 - Nails, tacks and staples
7616.10.30.00 - Rivets
7616.10.50.00 - Cotters and cotter pins
- Other:
7616.10.70 - Having shanks, threads or holes over 6 mm in diameter
7616.10.70.30 - Threaded fasteners
7616.10.70.90 - Other
7616.10.90 - Other
7616.10.90.30 - Threaded fasteners
7616.10.90.90 - Other
- Other:
7616.91.00.00 - Cloth, grill, netting and fencing, of aluminum wire
7616.99 - Other:
7616.99.10.00 - Luggage frames
7616.99.51 - Other
7616.99.51.20 - Laminated goods consisting of 2 or more flat-rolled sheets of aluminum held together with an adhesive or having a core of non-metallic material
7616.99.51.30 - Ladders
7616.99.51.40 - Venetian blinds and parts thereof
7616.99.51.50 - Hangers and supports for pipes and tubes
- Other:
7616.99.51.60 - Castings
7616.99.51.70 - Forgings
- Other:
7616.99.51.75 - Articles of wire (6)
7616.99.51.90 - Other (6)